
Sanitary ball valve is the full-bore shut-off valve for hygienic process lines — tri-clamp ends, fully polished SS316L body, zero dead space. The standard choice for food, beverage, dairy, brewery, pharma and personal-care production lines where easy CIP/SIP cleaning and food-grade hygiene compliance are mandatory.
Our sanitary ball valve is available in sizes 1″–4″ (DN25–DN100), SS316L body with internal polish Ra≤0.8μm, mirror-polished full-bore ball. food-grade EPDM, Silicone or PTFE seals. Tri-Clamp ends (3A standard), butt-weld optional. Manual lever as standard, lockable handle available. For automated operation see our pneumatic sanitary ball valve; for flow diversion see 3-way ball. get a detailed quotation with your size, end connection and seal material.
The main advantage of sanitary ball valve over sanitary butterfly valve is the tight shutoff capability. The ball-and-PTFE-seat design provides bubble-tight sealing, making it ideal for applications where bubble-tight acceptance per API 598 is critical. The full-bore design also minimizes pressure drop and allows easy CIP/SIP cleaning. Every valve is shell and seat pressure tested before shipment. MOQ 1 piece, 3-A style dimensions (3-A sanitary standard), 21 CFR 177 food-contact compliant seat material, DIN 11850 dimensions. We directly serve EPC contractors and valve distributors in Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait).
Southeast Asia & Middle East Market Notes
Thailand / Vietnam breweries & dairy: 1″–2″ Tri-Clamp PTFE ball valves, lockable handle — for bright beer tank outlet, milk pasteurizer isolation, sampling points. PTFE seat handles hot CIP caustic up to 80°C.
Indonesia / Malaysia palm oil & personal care: 2″–3″ ball valves with Silicone seat for crude palm oil degumming and cosmetic cream filling. Full-bore ball passes viscous media without shearing.
Saudi Arabia / UAE pharma & bottled water: 1″–1.5″ electropolished Ra≤0.4 μm ball valves, PTFE seat, for WFI and purified water loops. 3-A / EHEDG declaration on request.
Building a dairy / brewery / pharma skid? We supply matched ball + butterfly + check valves + clamps + gaskets in one shipment with one MTR.
Get Free Skid Take-Off →Sanitary Ball vs Butterfly vs Diaphragm vs Check Comparison
| Valve Type | Best For | Pressure | Seal Life | Cost |
|---|---|---|---|---|
| Sanitary Ball | Tight shutoff, tank outlet isolation, small dosing, slurry / solids, sampling points | PN16 | High (full port, tight PTFE seal) | Baseline |
| Sanitary Butterfly | Large lines, low cost, bulk transfer, frequent CIP/SIP | PN10 | Medium (seat wear on abrasive media) | ~0.5× ball |
| Sanitary Diaphragm | Ultra-high-purity pharma, WFI, aggressive CIP chemicals | PN10 | Low (diaphragm consumable) | ~1.5× ball |
| Sanitary Check | Prevent backflow on pump discharge, CIP return lines | PN10 | Medium (clack disc wear) | ~0.5× ball |
| Sanitary 3-Way Ball | Automated CIP divert, product / CIP switching | PN16 | High | ~2× ball |
Technical Specifications
| Size Range | 1″ - 4″ (DN25 - DN100); 6″+ on request |
| End Connection | Tri-Clamp (3A standard), butt-weld optional |
| Body Material | SS316L (1.4404) investment casting, internal Ra ≤ 0.8 μm |
| Ball | SS316L mirror polished, full bore |
| Seat / Seal | PTFE / EPDM / Silicone (21 CFR 177) |
| Actuation | Manual lever standard; lockable handle / gearbox / pneumatic optional |
| Pressure Rating | PN16 / 16 bar (at 20°C) |
| Temperature Range | -10°C ~ +140°C EPDM; +180°C PTFE; +200°C Silicone |
| Applicable Media | Food, beverage, dairy, brewery, pharma, CIP/SIP fluids |
| Testing | shell & seat pressure test per API 598 |
| Material Certificates | EN 10204 3.1 MTC (material test reports) included |
| Standard | 3A, 21 CFR 177, ISO, DIN 11850, EHEDG cleanable |
Dimension Table — Sanitary Ball Valve (mm)
| Size | DN | L (Face-to-Face) | H (Handle Height) |
|---|---|---|---|
| 1" | 25 | 83 | 110 |
| 1.5" | 40 | 95 | 125 |
| 2" | 50 | 112 | 140 |
| 2.5" | 65 | 135 | 165 |
| 3" | 80 | 158 | 185 |
| 4" | 100 | 200 | 225 |
* Contact us for complete dimension drawings with pneumatic / electric actuator mounted.
Worked Example: 2″ Tank Outlet Ball Valve for a Bangkok Dairy
Project: Skim milk holding tank 10,000 L, bottom outlet 2″ (DN50) sanitary ball valve, Tri-Clamp ends, PTFE seat, lockable handle. Tank operating pressure 1.5 bar, milk at 4°C, CIP cycle: 2% NaOH at 85°C, rinse, 1% nitric acid at 70°C.
Step 1 — Why ball, not butterfly? Tank outlet needs bubble-tight shutoff when the tank is drained for cleaning. A butterfly valve at tank bottom will weep after repeated cycles because the disc seats against a soft elastomer that compresses. A ball valve with PTFE seat holds zero leak indefinitely. This is why dairy spec sheets always call for ball valves at tank bottom.
Step 2 — Seat choice: CIP cycles hit 85°C NaOH and 70°C HNO₃. PTFE is the correct seat — chemically inert to both, 21 CFR 177, good to 180°C. EPDM would work for milk but degrades in hot caustic within 2–3 months. PTFE costs more but lasts years.
Step 3 — Lockable handle: We supply a lockable lever with padlock holes in open / closed / mid. The production line locks the valve CLOSED during CIP to prevent milk from draining into the CIP return, and locks it OPEN during filling. This is a safety interlock the dairy's HACCP plan requires.
Step 4 — Documentation: 3-A compliance declaration on request, food-grade seat cert, EN 10204 3.1 MTR. All wetted surfaces Ra 0.8 μm, passivated. Valve ships with plastic Tri-Clamp caps. We also supply matching Tri-Clamp gasket (EPDM) and clamp (304) as a kit so the dairy's maintenance team installs it in 5 minutes.
4 Common Mistakes When Ordering Sanitary Ball Valves
Mistake 1 — Specifying butterfly at tank outlet: Butterfly valves weep at tank bottom after 100+ cycles. Always use ball valve (or diaphragm valve for pharma) at tank outlet. Butterfly is for bulk transfer lines, not isolation.
Mistake 2 — EPDM seat for hot CIP: EPDM tops out at ~140°C continuous. Hot caustic CIP at 85°C is fine, but SIP steam at 135°C will swell EPDM within weeks. Specify PTFE if CIP temperature exceeds 95°C or SIP is in the cycle.
Mistake 3 — Forgetting the lockable handle: A standard lever can be opened by accident during CIP, draining product into the return. For tank isolation and CIP circuits, always specify the lockable handle — it's a HACCP requirement, not optional.
Mistake 4 — Mixing 3A / DIN / ISO Tri-Clamp sizes: 2″ Tri-Clamp in 3A standard (50.5 mm flange OD) is NOT the same as 2″ DIN 11850 (50.0 mm) or 2″ ISO. Always tell us which standard your existing piping uses — we match it exactly. Otherwise the clamp will leak.
Commercial Terms & Shipping
Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for orders above USD 20,000. PayPal for sample orders.
Warranty: 12 months after shipment for material and manufacturing defects. Covers casting defects, seat leakage and surface finish non-conformance. Damage from misuse, improper CIP chemicals or abrasive media beyond specified limits is not covered.
Packaging: Export plywood case (fumigation-free). Each valve packed in individual plastic bag with Tri-Clamp end caps to protect polished surfaces during transit.
Shipping Documents: EN 10204 3.1 MTC, 3-A compliance declaration on request, food-grade seat certificate, packing list, commercial invoice. Certificate of origin available on request.
Shipment Port: FOB Ningbo / Shanghai, China. Can also arrange CIF / DAP to your destination port.
Third-Party Inspection: SGS, Bureau Veritas or Intertek pre-shipment inspection supported at your cost.
Need Sizing Help or a Quote?
Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.
Get Free Quote »FAQ
Sanitary ball or sanitary butterfly — which do I specify?
Ball for tight shutoff under pressure, small dosing, tank outlet isolation, and media with solids / slurries. Butterfly for large lines (≥2″), low cost, bulk transfer, and frequent CIP/SIP. Ball is ~50% more expensive. For tank bottoms, product isolation and sampling points, ball is the default.
PTFE or EPDM seat — which is right?
PTFE is the default for sanitary ball valves — chemically inert, 21 CFR 177, handles CIP caustic / nitric acid / solvents, good up to ~180°C. EPDM for ultra-soft, low-torque, water-based media and SIP steam up to ~140°C. Silicone for ultra-high-temp SIP (~200°C).
Tri-Clamp or butt-weld end?
Tri-Clamp is the hygienic default — tool-free disassembly for seat replacement, CIP inspection. Butt-weld is for permanent welded skids in pharma WFI / high-purity. Most food & beverage lines choose Tri-Clamp.
Do you offer a lockable handle?
Yes. On request we supply a lockable lever handle with padlock holes in open / closed / mid positions — used for tamper protection on CIP circuits, tank isolation, and safety interlocks. We can also supply a position indicator plate and mounting bracket for limit switch retrofits.
Is this valve truly CIP/SIP cleanable? Any dead leg?
Yes. One-piece investment cast body, full-bore ball, seat clamped in a hygienic pocket. All wetted surfaces Ra ≤ 0.8 μm electro-polished. For pharma high-purity we can supply Ra ≤ 0.4 μm and a 3-A / EHEDG declaration.
Can I retrofit a pneumatic actuator later?
Yes — all our sanitary ball valves share a standard ISO 5211 top flange. Start with manual lever, add a pneumatic rack-and-pinion in 10 minutes without replacing the body. We supply actuator, feedback switch and solenoid as matched spares.
MOQ, stock and lead time?
MOQ is 1 piece. 1″–2″ PTFE Tri-Clamp lever valves are usually in stock (7–15 days). 3″–4″, EPDM / Silicone seats, butt-weld ends, lockable handle, or Ra ≤ 0.4 μm finish takes 15–30 days. We can ship together with sanitary butterfly, 3-way ball, gaskets and clamps in one container.
What is the warranty period for your valves?
We provide a 12-month warranty after shipment for material and manufacturing defects. This covers casting defects, seat leakage and surface finish non-conformance. Damage from misuse, improper CIP chemicals or abrasive media beyond specified limits is not covered.
📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Wafer Check Valve vs Swing Check Valve (2026 Guide)
You May Also Need
Related Technical Guides
Sanitary Ball Valve Guide · Sanitary Valves for Food & Beverage · Sanitary Valves for Pharma
Request a Quote for This Sanitary Ball Valve
Tell us the size, pressure and quantity you need. We reply within one working day.

