
A hygienic sight glass lets operators visually inspect tank interior and process flow in real time — polished SS316L body, borosilicate glass, food-grade gasket. Built for food, beverage, dairy, brewery, pharma and cosmetic production where food-grade hygiene and CIP/SIP compatibility are required.
Our hygienic sight glass comes in sizes 1″–6″ (DN25–DN150), SS304 / SS316L body with internal polish Ra≤0.8µm. Tempered borosilicate 3.3 glass with anti-shatter PET film standard. Tri-Clamp, union or flanged ends. food-grade EPDM, Silicone or PTFE gaskets. Optional LED light, wiper, scraper and steam flush. Pressure-rated PN10. For tank access see sanitary manhole; for piping see sanitary fittings.
Every unit is shell and seat pressure and leak tested before shipment. The borosilicate glass is tempered for thermal shock resistance through CIP/SIP cycles to 200°C. The optional LED provides clear visibility in dark tanks; the wiper keeps the glass clean on sticky or foamy media. We directly serve hygienic skid builders and EPC contractors across Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait). get a detailed quotation with size, connection and required accessories.
🌏 Southeast Asia & Middle East Market Notes
Thailand / Vietnam breweries: 4″–6″ top-mount sight glasses on bright beer tanks with LED light — brewers need to check foam, clarity and yeast level between CIP cycles. Wiper option for dry-hopped tanks.
Indonesia / Malaysia dairy: 2″–3″ side-mount on pasteurizer outlet and cream separation lines. EPDM gasket handles 140°C SIP. Steam flush option standard to prevent condensation on hot CIP return.
Saudi Arabia / UAE pharma & bottled water: 1.5″–2″ flanged sight glasses on WFI loops and reverse-osmosis skids. Sanitary audit requires secondary safety glass pane on the atmospheric side and Ra ≤ 0.4 µm electropolished body.
Building a new CIP / bright beer / WFI skid? We can quote sight glasses together with valves, fittings and manhole covers as one BOM.
Get Free Skid Take-Off →Sight Glass Type Comparison
| Type | Best For | Pressure / Temp | Cost |
|---|---|---|---|
| Tri-Clamp Sight Glass | Hygienic skids, periodic gasket inspection, food / dairy | PN10, 200°C | Baseline |
| Union (SMS/ISO) Sight Glass | Pipeline spools, tight seal, no pipe rotation | PN10, 200°C | ~1.1× tri-clamp |
| Flanged Sight Glass | Large tanks, high pressure, existing flanged nozzles | PN16, 300°C | ~1.5× tri-clamp |
| With LED Light | Dark tanks, night production, fermentation | Same as base | +30–60% |
| With Wiper / Scraper | Sticky / foamy media (yeast, cream, slurry) | Same as base | +40–80% |
| With Steam Flush | SIP hot cycles, condensation control | Same as base | +20–40% |
Technical Specifications
| Size Range | 1″ - 6″ (DN25 - DN150); larger on request |
| End Connection | Tri-Clamp (3A) / Union (SMS/ISO) / Flanged (ANSI or DIN) |
| Body Material | SS316L (1.4404) standard; SS304 (1.4301) option for water-based lines |
| Internal Polish | Ra ≤ 0.8 µm standard; Ra ≤ 0.4 µm electropolish optional (pharma WFI) |
| Glass | Tempered borosilicate 3.3, anti-shatter PET film bonded on process face; quartz option for extreme temp |
| Gasket | EPDM / Silicone / PTFE (21 CFR 177) |
| Optional Accessories | LED light (12V/24V), hand wiper / motorized scraper, steam flush, secondary safety pane |
| Pressure Rating | PN10 / 10 bar (at 20°C) — derate at elevated temperature |
| Temperature Range | 0°C ~ +200°C (gasket dependent) |
| Testing | pressure and leak test per unit per food-grade |
| Material Certificates | EN 10204 3.1 MTC per heat; 3A, 21 CFR 177, DIN 11850, EHEDG cleanable |
Dimension Table — Hygienic Sight Glass (mm)
| Size | DN | L (Face-to-Face) | H (Overall Height) |
|---|---|---|---|
| 1" | 25 | 64 | 70 |
| 1.5" | 40 | 76 | 80 |
| 2" | 50 | 89 | 90 |
| 2.5" | 65 | 102 | 105 |
| 3" | 80 | 127 | 125 |
| 4" | 100 | 152 | 145 |
| 5" | 125 | 178 | 170 |
| 6" | 150 | 203 | 195 |
* Dimensions may vary with LED / wiper options; contact us for the full drawing.
🧮 Worked Example: 4″ Sight Glass on a Bangkok Brewery Bright Beer Tank
Project: A craft brewery in Bangkok is commissioning a 30,000 L bright beer tank (BBT). They need a top-mounted sight glass so operators can visually check beer clarity, foam head and yeast sediment level before packaging. The tank operates at 1.5 bar CO2 pressure and 2°C.
Step 1 — Size: Tank diameter 3 m, roof nozzle already flanged DN100 (4″). The existing nozzle is 4″ Tri-Clamp per the tank design — so we supply a 4″ Tri-Clamp sight glass, not flanged. If the nozzle had been welded, we would have supplied butt-weld ends to match.
Step 2 — Glass and gasket: Bright beer is clear, but CO2 pressure is 1.5 bar — well within PN10. We specify tempered borosilicate 3.3 with anti-shatter PET film (mandatory in case glass cracks — no shards drop into the beer). Gasket: EPDM (food-grade, handles CIP caustic at 85°C weekly). Silicone would be overkill; PTFE unnecessary.
Step 3 — Accessories: The tank is inside a dim brewhouse room — operators need an LED light on the atmospheric side to actually see the beer level at night. Dry-hopped beer leaves a thin film on the glass between CIP cycles — we add a hand wiper so the operator can wipe the glass from outside with a crank. No steam flush needed (CIP is once per week, and condensation clears quickly at 2°C).
Result: 4″ Tri-Clamp sight glass, SS316L body, borosilicate glass with anti-shatter film, EPDM gasket, LED light (24V), hand wiper. Installed on the BBT roof nozzle. Operator walks up the tank platform, turns on LED, wipes the glass with the crank, and reads beer level + foam without opening the tank.
⚠️ 4 Common Mistakes When Ordering Sight Glasses
Mistake 1 — No anti-shatter film: Some cheap sight glasses skip the PET film on the process side. If the glass cracks under pressure, shards drop straight into the product line — a food safety recall event. Always specify "anti-shatter film bonded to process face" on the order.
Mistake 2 — Bottom-mounted on a tank: Glass on the bottom of a tank carries the full weight of the product and sees the highest stress. Bottom-mounted glass failures are catastrophic (full product spill). Always mount sight glass on the roof (top) or side — never on the bottom dished head.
Mistake 3 — Skipping the wiper on sticky media: Yeast, cream, slurry and syrup coat the glass within hours. Without a wiper, the operator is blind between CIP cycles. If your media is sticky or foamy, spec a hand wiper at minimum — it costs 40% more but saves daily teardown.
Mistake 4 — Ignoring gasket temperature derating: EPDM is rated to 140°C continuous, but SIP steam hits 150°C for short cycles. If you run regular SIP, upgrade to Silicone gasket (200°C) — running EPDM on SIP will harden the gasket in 6 months and cause leaks.
📋 Commercial Terms
Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for skid package orders. PayPal for sample orders.
Warranty: 12 months after shipment for material and manufacturing defects — covers glass edge chipping on receipt, gasket non-conformance, body dimensional non-conformance, anti-shatter film delamination and weld defects on polished body. Damage from impact mishandling during installation, over-torque beyond specification, bottom-mount field failure, or gasket chemical exposure beyond rated limits is not covered. Cracked glass from handling is shipped at buyer’s risk after leaving our factory.
Packaging: Export plywood case; fumigation-free pallet; glass protected with foam end-caps and plastic film to prevent transit chipping.
Shipping Documents: EN 10204 3.1 MTC per heat, pressure test certificate, food-grade gasket material declaration, packing list, commercial invoice; 3A / EHEDG compliance statement on request.
Shipment Port: FOB Ningbo / Shanghai, China; CIF / DAP available on request.
Third-Party Inspection: SGS / Bureau Veritas / Intertek pre-shipment dimension, glass integrity and leak inspection supported at buyer cost.
Need Sizing Help or a Quote?
Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.
Get Free Quote »FAQ
Borosilicate or quartz glass — which do I need?
Tempered borosilicate 3.3 is the hygienic default — handles CIP/SIP up to ~200°C, thermal shock resistant, anti-shatter film standard. Quartz is only needed for extreme temperatures (>1000°C), UV sterilization, or WFI / pharma high-purity. 95% of food / dairy / brewery customers run borosilicate.
Tri-Clamp, union or flanged end — which is right?
Tri-Clamp for lines needing periodic glass / gasket inspection — hygienic default. Male-female union for pipeline serviceable joints. Flanged for high pressure (>PN10), large tanks, or existing flanged nozzles. Most food & beverage skids use Tri-Clamp.
Do I really need an LED light? What about wiper and steam flush?
LED is worth it for dark tanks, night production, or any process where visual level / color / foam check matters (fermentation, bright beer, syrup). Wiper for sticky / foamy media (yeast, cream, slurry). Steam flush prevents condensation on hot CIP/SIP cycles — standard on pharma and dairy SIP skids.
How do I prevent the glass from shattering into product?
Every unit ships with a transparent anti-shatter PET film bonded to the inside glass face — if the glass cracks, shards stay bonded. For pharma WFI we also supply a secondary safety pane on the atmospheric side. A scratched glass edge is the #1 failure point — handle gaskets with clean gloves.
Can I install the sight glass vertically or only horizontally?
Both — but never bottom-mount. Top-mount on tank: glass looks down into product; add wiper if foam splashes. Side-mount on pipeline: glass looks across flow; add anti-shatter film on process side. For vertical pipeline sections, mount the glass in a horizontal spool piece.
EPDM or Silicone gasket — do I need to upgrade for SIP?
If your line runs occasional CIP at 85°C, EPDM is fine (rated to 140°C). If you run regular SIP steam at 140–150°C, upgrade to Silicone (200°C) — EPDM will harden and leak within 6 months. Tell us your SIP temperature and cycle frequency and we match the gasket.
MOQ, stock and lead time?
MOQ is 1 piece. 1″–3″ SS304 / SS316L Tri-Clamp standard sight glasses (no accessories) are usually in stock (5–7 days). 4″–6″, union / flanged ends, LED, wiper, steam flush, quartz glass, or Ra ≤ 0.4 µm finish takes 7–15 days. We ship together with fittings, manhole covers and gaskets in one container.
What is your warranty period?
We provide a 12-month warranty after shipment for material and manufacturing defects. This covers glass edge chipping on receipt, gasket non-conformance, body dimensional non-conformance, anti-shatter film delamination and weld defects on the polished body. Damage from impact mishandling, over-torque beyond specification, bottom-mount field failure, or gasket chemical exposure beyond rated limits is not covered. Always provide the heat number from the EN 10204 3.1 MTC when raising a warranty claim.
📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Wafer Check Valve vs Swing Check Valve (2026 Guide)
You May Also Need
Related Technical Guides
Request a Quote for This Hygienic Sight Glass
Tell us the size, pressure and quantity you need. We reply within one working day.
Need a Custom Valve or Fitting?
Send us your specs: pressure, size, material and quantity — our engineers will reply within 24 hours with a detailed quotation. MOQ 1 piece.
FOB Ningbo / Shanghai · 5–10 days to Southeast Asia · 15–20 days to the Middle East · We reply within 24 hours (usually same business day)
Commercial terms: T/T 30% deposit + 70% before shipment, L/C at sight · export plywood case / fumigation-free pallet · 12 months warranty after shipment for material and manufacturing defects · EN 10204 3.1 MTC + API 598 test report + packing list + commercial invoice with every order · SGS / Bureau Veritas / Intertek pre-shipment inspection available
Get Free Quote »
