
Stainless seamless pipe is the most common piping material for industrial systems — seamless construction, no weld seam, higher pressure rating than welded pipe. Designed for oil & gas, chemical, water treatment, shipbuilding, food and pharma piping projects where ANSI B36.19 dimensions and 3.1 mill certificates are required.
Our stainless seamless pipe is available in sizes 1/8″–24″ (DN6–DN600), wall thickness SCH5S–SCH160S. Seamless SS304 / SS304L / SS316 / SS316L. Plain end / bevel end / threaded end. For complete piping systems, see our butt-weld pipe fittings and stainless steel flanges. get a detailed quotation with your size, wall thickness and material grade.
Every stainless seamless pipe is hydro tested and PMI material tested; mill EN 10204 3.1 certificate included. MOQ 1 piece, 15–30 days delivery, EN 10204 3.1 MTC available. The main advantage of seamless pipe over welded pipe is the absence of a longitudinal weld seam, which eliminates leakage risk and allows higher pressure ratings. Seamless pipe is also more resistant to external corrosion and has better mechanical properties, making it ideal for high-pressure and high-temperature service in chemical and petrochemical plants.
🌏 Southeast Asia & Middle East Market Notes
Thailand / Vietnam food & beverage breweries: 316L seamless pipe, DN25–DN100, SCH10S, Ra 0.8 µm polished — for CIP-cleaned process lines. EN 10204 3.1 MTR required for HACCP audit.
Indonesia / Malaysia palm oil & petrochemical: 316L seamless pipe, SCH40S, DN50–DN300 — for crude palm oil, cooling water and steam condensate. Cold-drawn for tighter OD tolerance, welded with ER316L filler.
Saudi Arabia / UAE seawater desalination & oil & gas: 316L seamless pipe, SCH40S, DN80–DN500 — for SWRO feed, brine discharge and cooling water. The molybdenum in 316L resists chloride pitting that destroys 304 within 1–2 years in coastal service.
Need a complete piping system — pipe + elbows + tees + flanges + gaskets in one shipment with one MTR? Send us your P&ID.
Get Free Piping Take-Off →Seamless vs ERW vs LSAW vs SSAW Pipe Comparison
| Type | Manufacturing | Pressure Rating | Best For | Cost Index |
|---|---|---|---|---|
| Seamless | Hot-rolled / cold-drawn from solid billet | Highest (up to SCH160S) | Process, oil & gas, pharma, offshore — mandatory | 1.0× |
| ERW (Electric Resistance Welded) | Rolled strip, resistance-welded longitudinal seam | Medium (up to SCH40S) | Water, HVAC, structural, low-pressure gas | ~0.5× |
| LSAW (Longitudinal Submerged Arc Welded) | Plate rolled, double-sided SAW seam | Medium-high (large OD) | Pipelines, piling, large OD DN600+ | ~0.4× |
| SSAW (Spiral Submerged Arc Welded) | Coil spirally wound, SAW seam | Medium (large OD, low pressure) | Water transmission, piling, structural | ~0.3× |
| Welded (Butt-welded coil) | Coil longitudinally welded, polished | Low-medium (thin wall) | Hygienic tubing, food / pharma, dairy | ~0.6× |
Technical Specifications
| Size Range | 1/8″ – 24″ (DN6 – DN600) |
| Wall Thickness | SCH 5S – SCH 160S |
| Material | 316L (1.4404) / 304L (1.4306) seamless; 304 / 316 / 321 on request |
| End Connection | Plain end / bevel end (per ANSI B16.25) / threaded end (NPT/BSPP) |
| Standard | ANSI B36.19, ASTM A312 TP304/316, EN 10216-5 |
| Length | 6 m / 12 m random; cut-to-length with deburred ends |
| Temperature Range | -29°C ~ +425°C (material dependent) |
| Surface Finish | Pickled satin standard; Ra 0.8 µm polished / BA for food pharma |
| Testing | hydro test + eddy-current + PMI XRF per batch |
| Material Certificates | EN 10204 3.1 MTC included per heat; PED 2014/68/EU, CE on request |
Dimension Table — Seamless Pipe (mm, ANSI B36.19)
| NPS | DN | OD | SCH 10S | SCH 40S | SCH 80S |
|---|---|---|---|---|---|
| 1/2″ | 15 | 21.3 | 1.65 | 2.77 | 3.73 |
| 3/4″ | 20 | 26.9 | 1.65 | 2.87 | 3.91 |
| 1″ | 25 | 33.7 | 1.65 | 3.38 | 4.55 |
| 1 1/4″ | 32 | 42.4 | 1.65 | 3.56 | 4.85 |
| 1 1/2″ | 40 | 48.3 | 1.65 | 3.68 | 5.08 |
| 2″ | 50 | 60.3 | 1.65 | 3.91 | 5.54 |
| 2 1/2″ | 65 | 73.0 | 2.11 | 5.16 | 7.01 |
| 3″ | 80 | 88.9 | 2.11 | 5.49 | 7.62 |
| 4″ | 100 | 114.3 | 2.11 | 6.02 | 8.56 |
| 5″ | 125 | 139.7 | 2.77 | 6.55 | 9.53 |
| 6″ | 150 | 168.3 | 2.77 | 7.11 | 10.97 |
| 8″ | 200 | 219.1 | 2.77 | 8.18 | 12.70 |
| 10″ | 250 | 273.0 | 3.40 | 9.27 | 15.09 |
| 12″ | 300 | 323.8 | 3.96 | 10.31 | 17.48 |
* Length: 6 m / 12 m standard random, or cut to your required length. SCH5S / SCH160S available on request. Contact us for complete dimension drawings.
🧮 Worked Example: Sizing 316L Seamless Pipe for a Jakarta Chemical Plant Cooling Water Line
Project: Cooling water pump discharge, DN100 (4″), 316L seamless, SCH40S, ANSI B36.19. Design pressure 10 bar, temperature 35°C, fluid = cooling water with 200 ppm chloride.
Given: Flow 80 m³/h, allowable velocity 2.5 m/s, pump suction NPSHA = 3.2 m.
Step 1 — Check velocity with DN100 SCH40S:
ID = OD − 2t = 114.3 − 2×6.02 = 102.26 mm. Area = π/4 × (0.1023)² = 0.00821 m². Velocity = 80/3600 / 0.00821 = 2.71 m/s. Slightly above the 2.5 m/s target — acceptable for discharge (velocity limit 3 m/s), but if headroom matters, upgrade to DN125 (5″).
Step 2 — Wall thickness check by Barlow formula:
P = 2 × S × t / D. For 316L at 35°C, allowable stress S ≈ 115 MPa (ASTM A312). Required t = P × D / (2×S) = 1.0 MPa × 114.3 / (2×115) = 0.50 mm. SCH40S (6.02 mm) gives a safety factor of 12× — more than enough. Even SCH10S (2.11 mm) would pass the pressure requirement; SCH40S is chosen for long-term corrosion allowance (1–2 mm wall loss over 20 years).
Step 3 — Material: 304 vs 316L?
200 ppm chloride at 35°C — 304 will pit within 1–2 years. Specify 316L (1.4404) for PREN ≥25. L-grade (C≤0.030%) avoids carbide precipitation during field welding to elbows and flanges.
Step 4 — Documentation & end prep:
Bevel end per ANSI B16.25 (37.5° + 1.6 mm root face) for direct field welding. Each length ships with EN 10204 3.1 MTC certifying heat number, chemistry (C≤0.030%, Mo 2.0–2.5%), PMI result, hydro test. We run XRF on every batch and stamp heat number on the pipe for traceability.
⚠️ 4 Common Mistakes When Ordering Seamless Pipe
Mistake 1 — Buying ERW “seamless-looking” pipe for process service: Many suppliers pass off ERW welded pipe as “seamless” at 50% price. The longitudinal weld seam is the #1 leakage point in chemical service. Always verify with the MTR — seamless pipe has no weld seam, and the mill cert explicitly states “seamless” per ASTM A312.
Mistake 2 — Specifying 304 for coastal / seawater service: 304 pits in 200+ ppm chloride within 1–2 years. Always specify 316L for seawater, cooling tower water with chlorine, or coastal atmosphere. The 20–30% price premium is trivial vs replacing a welded spool.
Mistake 3 — SCH mismatch with fittings: If pipe is SCH40S and fitting is SCH10S, the internal bore has a step at the weld root. This causes turbulence, erosion and stress corrosion. Always match schedule across pipe, fittings and flanges.
Mistake 4 — Forgetting the MTR / PMI on delivery: Without EN 10204 3.1, you cannot defend material grade in an audit, insurance claim or piping failure investigation. Request it explicitly on the PO, and spot-check with an XRF PMI gun on arrival — 304 vs 316L is visually indistinguishable.
📋 Commercial Terms
Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for piping package or spool orders. PayPal for sample orders.
Warranty: 12 months after shipment for material and manufacturing defects — covers wall thickness non-conformance, OD/ID dimensional non-conformance, material chemistry non-conformance (PMI mismatch vs MTR), hydro test failure and surface pickling defects. Field welding defects, mis-handled pickling / passivation after arrival, or coastal / chloride corrosion beyond the specified PREN service limit is not covered. Wall loss from long-term erosion / corrosion allowance consumption is not a warranty item.
Packaging: Export bundle on fumigation-free pallet; both ends capped with plastic / steel plugs; bundled with wooden slats; wrapped in waterproof film.
Shipping Documents: EN 10204 3.1 MTC per heat, hydro test report, PMI XRF result, packing list, commercial invoice, PED / CE declaration on request.
Shipment Port: FOB Ningbo / Shanghai, China; CIF / DAP available on request.
Third-Party Inspection: SGS / Bureau Veritas / Intertek pre-shipment dimensional, hydro and PMI inspection supported at buyer cost.
Need Sizing Help or a Quote?
Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.
Get Free Quote »FAQ
Seamless or welded (ERW) pipe — which do I specify?
We supply seamless only. Seamless pipe has no longitudinal weld — zero risk of weld seam leakage in chemical service, higher pressure rating and better corrosion resistance. ERW / welded pipe is 30–50% cheaper but only acceptable for low-pressure water, HVAC and structural use. For process, oil & gas, pharma and offshore, seamless is mandatory.
Which wall thickness (SCH) do I choose?
For normal water / air / non-critical chemical at PN16, SCH10S is enough. For oil & gas, steam, high pressure or corrosive process, use SCH40S minimum. Sub-sea, sour service or high pressure requires SCH80S / SCH160S. When in doubt, pick SCH40S — it is the default for process piping.
304 / 304L vs 316 / 316L — which material?
304L is for general water, HVAC and mild chemicals. 316L adds molybdenum (2–2.5%) for chloride / coastal / bleach / marine service. The “L” (low carbon) prevents carbide precipitation during welding. For pharma / food / outdoor / coastal projects, always specify 316L.
What surface finish do you offer?
Standard is pickled (greenish-grey satin) — removes scale, ready to weld. On request: polished Ra ≤ 0.8 µm for food / pharma, bright annealed (BA) for hygienic tubing, sandblasted for outdoor / structural, #4 brushed for cosmetic / architectural.
What pipe length do you supply?
Standard seamless pipe is 6 meters (20 ft) random length, ±200 mm. 12 meters (40 ft) available on request. We can also cut to your required length (with deburred ends) at no extra cost. For export, pipes are bundled with wooden slats and plastic caps on both ends.
Can you supply pipe with elbows, tees and flanges as a pre-fabricated spool?
Yes — we supply complete pre-fabricated piping spools with pipe, elbows, tees and reducers, flanges and gaskets in one shipment, with one heat number and one MTR. This saves field welding time and ensures material consistency across the joint.
MOQ, stock and lead time?
MOQ is 1 piece / 6-meter random length. DN15–DN100 SCH10S / SCH40S in 304 are usually in stock (7 days). DN125+, 316L, special schedule or cut-to-length takes 15–30 days.
What is your warranty period?
We provide a 12-month warranty after shipment for material and manufacturing defects. This covers wall thickness non-conformance, OD/ID dimensional non-conformance, material chemistry / PMI mismatch against the MTR, hydro test failure and pickling surface defects. Field welding defects, mis-handled pickling after arrival, or chloride / coastal corrosion beyond the specified PREN service limit is not covered. Always quote the heat number from the EN 10204 3.1 MTC when raising a warranty claim.
📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Y-Strainer Sizing Guide for Power Plants
You May Also Need
Related Technical Guides
Request a Quote for This Stainless Seamless Pipe
Tell us the size, pressure and quantity you need. We reply within one working day.

