Sanitary Manhole | Chuanglan Valve

▲

Sanitary Manhole Cover | Round Rectangular

Hygienic manways with clamp closure — no product traps, easy CIP access.

food-grade hygienic tank access — round DN150–DN600 or rectangular 300×400–600×800 in SS304 / SS316L. Single-handle, swing-handle or bolted locking; optional sight glass, LED light, pressure gauge and CIP spray ball. PN6 pressure-tested, leak-tested before shipment.

OEM/ODMCustom Manufacturing
ISO 9001:2015Quality Management
Established 2009Valve Manufacturing
7–15 DaysLead Time

* Standard lead time depends on order quantity and destination country. 5–10 days to Southeast Asia, 15–20 days to the Middle East.

✍️ Reviewed by Chuanglan Valve Engineering Team · Last updated Oct 2026 · Follow us on LinkedIn
Hygienic sanitary manhole cover round rectangular SS316L cam-lock 3A - Chuanglan Valve

A sanitary manhole cover provides clean, tool-free tank access for hygienic process tanks — polished SS316L body, food-grade gasket, cam-lock or swing-handle. Built for food, beverage, dairy, brewery, pharma and cosmetic tanks where CIP/SIP compatibility and food-grade hygiene are required.

Our sanitary manhole comes in round (DN150–DN600) and rectangular (300×400–600×800) shapes, custom sizes available. SS304 / SS316L body with internal polish Ra≤0.8µm. food-grade EPDM, Silicone or PTFE gaskets. Single-handle, swing-handle or bolted locking. Optional sight glass, LED light, pressure gauge and CIP spray ball. Pressure-rated PN6 standard, PN10 with bolted flange. get a detailed quotation with shape, size and required accessories.

Every unit is shell and seat pressure and leak tested before shipment. The cam-lock single-handle design allows daily access without tools. The optional CIP spray ball mounted on the lid gives 360° coverage without welding a separate nozzle inside the tank. We also supply matching sanitary fittings and ball valves as one BOM. We directly serve EPC contractors and hygienic tank builders across Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait).

🌏 Southeast Asia & Middle East Market Notes

Thailand / Vietnam breweries: DN500 round cam-lock manholes on bright beer and fermentation tanks — daily yeast harvest access. Built-in sight glass + LED so brewers don’t need a separate nozzle.

Indonesia / Malaysia dairy: Rectangular 500×600 swing-handle manholes on milk storage and CIP recovery tanks — large enough for a worker to climb in for internal inspection. Silicone gasket for 140°C SIP.

Saudi Arabia / UAE bottled water & pharma: Bolted PN10 manholes on WFI and RO permeate tanks — Sanitary audit requires full-bolted flange, Ra ≤ 0.4 µm electropolish, and 3.1 MTC per heat. Coastal humidity mandates SS316L.

Building new hygienic tanks? Send us your P&ID and tank drawing — we will quote manholes, sight glasses, valves and fittings as one BOM.

Get Free Tank BOM Take-Off →

Manhole Type Comparison

TypeBest ForPressureOpening
Round Single-Handle (Cam-Lock)Standard food / dairy / brewery tanks, daily accessPN6Tool-free, seconds
Round Swing-HandleLarger DN400+, heavy lid, positive pressurePN6–PN10Lever pivots clear
Round Bolted FlangePressure vessels, pharma WFI, vacuum tanksPN10+Bolts, tool required
Rectangular Cam-LockWorker entry (mash tun, CIP recovery)PN6Tool-free
Rectangular Swing-HandleLarge dairy / cosmetic tanksPN6Lever pivots clear
With Built-in Sight GlassFermentation, bright beer, level checkSame as baseSame as base

Technical Specifications

ShapeRound / Rectangular / Oval (customizable)
Size RangeRound DN150–DN600; Rectangular 300×400–600×800; custom on request
Body MaterialSS316L (1.4404) standard; SS304 (1.4301) option for cost-sensitive atmospheric tanks
Internal PolishRa ≤ 0.8 µm standard; Ra ≤ 0.4 µm electropolish optional (pharma WFI)
GasketEPDM / Silicone / PTFE (21 CFR 177); replacement gaskets available separately
LockingSingle-handle cam-lock / swing-handle / bolted flange
Optional AccessoriesSight glass, LED light, pressure gauge, CIP spray ball
Pressure RatingPN6 standard (cam-lock); PN10 with bolted flange
Temperature Range0°C ~ +200°C (gasket dependent)
Testingpressure and leak test per unit per food-grade
Material CertificatesEN 10204 3.1 MTC per heat; 3A, 21 CFR 177, DIN 11850, EHEDG cleanable

Dimension Table — Round Sanitary Manhole (mm)

SizeDND (Flange OD)H (Overall Height)
6"15023085
8"20028095
10"250330105
12"300390115
16"400500130
20"500610145
24"600720160

* Contact us for rectangular manhole dimension drawings.

🧮 Worked Example: UAE Bottled Water Plant CIP Recovery Tank

Project: A bottled water plant in Dubai is upgrading its CIP system. The CIP recovery tank holds hot caustic (80°C NaOH) and acid rinse. Operators need to climb in quarterly for internal inspection and sludge removal. The tank runs under slight vacuum during CIP return.

Step 1 — Shape and size: A worker must climb in. A round DN600 opening is just barely passable and forces a crouched entry. We specify a rectangular 500×600 swing-handle manhole — large enough for a worker with harness and inspection mirror, and rectangular openings are easier to seal against vacuum.

Step 2 — Locking type: The tank runs under vacuum during CIP return. A cam-lock single-handle is rated only PN6 and relies on mechanical cam pressure — under external vacuum it can flex and leak. We specify swing-handle with 8 bolts around the perimeter (semi-bolted) — the heavy lever pulls the lid down evenly, and the bolts provide positive sealing against vacuum.

Step 3 — Gasket and material: Hot caustic at 80°C weekly, plus coastal Dubai humidity. SS316L body (304 would pit within 2 years under caustic + coastal chloride). EPDM gasket handles 80°C caustic and occasional 110°C SIP rinse — Silicone unnecessary because SIP is short.

Step 4 — Accessories: Mount a CIP spray ball on the inside of the lid so the tank gets 360° automated cleaning during CIP return — no manual washing needed. Add a pressure gauge on the lid so operators can confirm vacuum is released before opening (safety interlock). No sight glass needed — the recovery tank is only inspected quarterly.

Result: 500×600 rectangular swing-handle manhole, SS316L, EPDM gasket, 8 perimeter bolts, CIP spray ball mounted on lid, pressure gauge on lid. Installed on the CIP recovery tank. Operator releases vacuum via gauge, opens the swing lever, climbs in for quarterly inspection. CIP spray ball cleans the interior automatically between inspections.

⚠️ 4 Common Mistakes When Ordering Sanitary Manholes

Mistake 1 — Cam-lock on a pressure or vacuum vessel: Single-handle cam-lock is rated only PN6 and relies on cam friction. If your tank runs positive pressure (closed fermentation) or vacuum (CIP recovery, hot cooling), the lid can lift or flex — a safety hazard. Specify swing-handle or bolted flange for any tank outside atmospheric CIP.

Mistake 2 — Round opening when a worker must climb in: A DN600 round opening is only just passable and forces a crouched, awkward entry. For quarterly worker entry, always use a rectangular 500×600 or larger opening — it is cheaper than you think and saves inspection time.

Mistake 3 — SS304 on aggressive CIP or coastal sites: Caustic + nitric acid CIP and coastal chloride (UAE, Saudi, Southeast Asia) pit 304 within 2–3 years. If your CIP uses acids or your plant is on the coast, spec SS316L from day one. The ~25% upgrade pays for itself in one gasket cycle.

Mistake 4 — Forgetting the gasket spare set: Manhole gaskets compress over 12–24 months and start leaking. Customers often order one manhole and forget the spare gasket. We always include 2 spare EPDM gaskets with every order — but tell us if you need spares in Silicone or PTFE.

📋 Commercial Terms

Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for large tank packages. PayPal for sample orders.

Warranty: 12 months after shipment for material and manufacturing defects — covers gasket non-conformance, locking mechanism failure, body dimensional non-conformance, internal surface finish non-conformance and weld defects on polished shell. Damage from over-torque beyond specification, improper CIP chemicals beyond gasket rated limits, or field welding not performed by Chuanglan is not covered.

Packaging: Export plywood case; fumigation-free pallet; internal polish protected with plastic film and foam to prevent transit scratches.

Shipping Documents: EN 10204 3.1 MTC per heat, pressure test certificate, food-grade gasket material declaration, packing list, commercial invoice; 3A / EHEDG compliance statement on request.

Shipment Port: FOB Ningbo / Shanghai, China; CIF / DAP available on request.

Third-Party Inspection: SGS / Bureau Veritas / Intertek pre-shipment dimension, surface finish and leak inspection supported at buyer cost.

Need Sizing Help or a Quote?

Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.

Get Free Quote »

FAQ

Round or rectangular manhole — which do I specify?

Round is the standard hygienic choice — structurally strong, easy to seal, common on fermentation, storage and bright beer tanks (DN150–DN600). Rectangular is for large internal access where a worker needs to climb in (300×400–600×800) — typical on brewery mash tuns, dairy milk tanks and CIP recovery tanks. If you are building a new tank and don’t need worker entry, round is cheaper and faster to deliver.

Single-handle, swing-handle or bolted locking?

Single-handle (cam-lock) for quick tool-free opening — the default on most food & beverage tanks, daily access, atmospheric pressure. Swing-handle for heavy-duty, larger DN400+ lids and positive pressure — lever pivots out of the way during entry. Bolted flange for pressure vessels (>PN6), pharma WFI tanks, or vacuum cycling. Tell us your operating pressure and opening frequency.

Which gasket — EPDM, Silicone or PTFE?

EPDM is the hygienic default — water-based media, CIP caustic / nitric acid, SIP to ~140°C. Silicone for ultra-high-temp SIP (~200°C) and oily / fatty media (cream, oil tanks). PTFE for aggressive solvents and extreme chemical resistance. All gaskets 21 CFR 177.

Are sight glass, LED, pressure gauge and CIP spray ball worth it?

Sight glass built into the lid replaces a separate nozzle — saves welding and leak paths on fermentation / bright tanks. LED for dark tanks and night CIP verification. Pressure gauge required on any closed CIP / SIP tank (safety interlock before opening). CIP spray ball on the lid gives 360° coverage without welding a separate nozzle inside. Most brewery / dairy skids take all four.

What pressure rating do I really need?

Standard PN6 (6 bar) is enough for most atmospheric / low-pressure CIP / SIP tanks. For tanks under vacuum (CIP recovery, hot cooling) or positive internal pressure (closed fermentation, SIP), specify PN10 and switch to swing-handle or bolted locking. Never run a cam-lock above its rated pressure.

Can I buy just the replacement gasket?

Yes. We sell EPDM, Silicone and PTFE replacement gaskets separately in all standard sizes (DN150–DN600 round, 300×400–600×800 rectangular). Gaskets typically need replacement every 12–24 months under daily CIP. Send us your manhole size and current gasket material and we ship spares.

MOQ, stock and lead time?

MOQ is 1 piece. Round DN150–DN300 single-handle SS304 is usually in stock (7–10 days). DN400+, rectangular, swing-handle, bolted, SS316L, custom sizes, sight glass / spray ball / LED options, or special pressure ratings take 15–25 days. We ship together with sight glasses, fittings and gaskets in one container.

What is your warranty period?

We provide a 12-month warranty after shipment for material and manufacturing defects. This covers gasket non-conformance, locking mechanism failure, body dimensional non-conformance, internal surface finish non-conformance and weld defects on the polished shell. Damage from over-torque beyond specification, improper CIP chemicals beyond the gasket rated limits, or field welding not performed by Chuanglan is not covered. Always provide the heat number from the EN 10204 3.1 MTC when raising a warranty claim.

📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Wafer Check Valve vs Swing Check Valve (2026 Guide)

You May Also Need

Request a Quote for This Sanitary Manhole Cover

Tell us the size, pressure and quantity you need. We reply within one working day.








    Need a Custom Valve or Fitting?

    Send us your specs: pressure, size, material and quantity. Our team will review the requirements and provide a direct quote.

    Southeast Asia: Indonesia, Malaysia, Thailand, Vietnam, Singapore, Philippines · Middle East: Saudi Arabia, UAE, Qatar, Kuwait, Oman, Bahrain · Other: the Americas, Europe, Africa, Australia

    FOB Ningbo / Shanghai · We usually reply within 24 business hours.

    Commercial terms: T/T 30% deposit + 70% before shipment, L/C at sight may be considered · export plywood case · 12 months warranty after shipment · EN 10204 3.1 MTC available on request · third-party inspection can be arranged on request.

    Disclaimer: This guide is for general engineering reference only. Final valve selection, sizing and installation must follow the manufacturer data sheet, the project P&ID and the applicable code (EN 1092, ASME B16.5, ASME B16.34, EN 10204 3.1). Where this article and those documents differ, the documents govern.