Sanitary Butterfly Valve | Chuanglan Valve

▲

Sanitary Butterfly Valve | Tri-Clamp Manual

Hygienic butterfly valves with crevice-free bodies for CIP/SIP cleaning.

food-grade hygienic butterfly valve — SS316L body Ra≤0.8μm, mirror-polished disc, food-grade EPDM / Silicone / PTFE seat, Tri-Clamp ends, lever handle standard. Built for CIP/SIP food, dairy, brewery and pharma lines.

OEM/ODMCustom Manufacturing
ISO 9001:2015Quality Management
Established 2009Valve Manufacturing
7–15 DayLead Time

* Standard lead time depends on order quantity and destination country. 5–10 days to Southeast Asia, 15–20 days to the Middle East.

✍️ Reviewed by Chuanglan Valve Engineering Team · Last updated Oct 2026 · Follow us on LinkedIn
Sanitary butterfly valve, stainless steel

A sanitary butterfly valve is the standard hygienic flow-control valve — tri-clamp ends, fully polished SS316L body, compact no-dead-space design. The go-to choice for food, beverage, dairy, brewery, pharma and personal-care process lines where easy CIP/SIP cleaning and food-grade hygiene compliance are required.

Sizes 1″–4″ (DN25–DN100), SS316L body with internal polish Ra≤0.8μm, mirror-polished disc. food-grade EPDM, Silicone or PTFE seats. Tri-Clamp ends (3A standard), butt-weld optional. Manual lever as standard, gearbox actuator available for larger sizes. For automated operation see our pneumatic sanitary butterfly valve; for tight shutoff see sanitary ball valve. get a detailed quotation with your size, end connection and seal material.

The main advantage of a sanitary butterfly valve over sanitary ball valves or diaphragm valves is its lightweight, compact design and fast 90° quarter-turn operation. The body has no internal crevices or dead legs, making CIP (clean-in-place) and SIP (sterilize-in-place) cycles quick and thorough. Every valve is shell and seat pressure tested before shipment. MOQ 1 piece, 3-A style dimensions (3-A sanitary standard), 21 CFR 177 compliant seat material, DIN 11850 dimensions. We directly serve EPC contractors and valve distributors in Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait).

Southeast Asia & Middle East Market Notes

Thailand / Vietnam breweries & dairy: 2″–3″ Tri-Clamp lever valves, EPDM seat, Ra 0.8 μm — for wort transfer, CIP return, milk pasteurizer inlet. Standard 3A end matches existing APV / Tetra Pak piping.

Indonesia / Malaysia palm oil & personal care: 2″–4″ sanitary butterfly valves with Silicone seat (for fatty media up to 150°C). Used in crude palm oil degumming and cosmetic cream filling lines.

Saudi Arabia / UAE pharma & bottled water: 1″–2″ electropolished Ra≤0.4 μm valves, PTFE seat, for WFI and purified water loops. 3A / EHEDG declaration required for Sanitary audit.

Brewery / dairy / pharma skid build? We supply matched valves + clamps + gaskets in one shipment with one 3.1 MTR.

Get Free Skid Take-Off →

Sanitary Valve Type Comparison

Valve TypeBest ForPressureSeal LifeCost
Sanitary ButterflyLarge lines, frequent CIP/SIP, bulk transfer, low pressure dropPN10Medium (seat wear on abrasive media)Lowest
Sanitary Ball ValveTight shutoff, high pressure, small dosing, slurry / solidsPN16High (full port, tight seal)~2× butterfly
Sanitary Diaphragm ValveUltra-high-purity pharma, WFI, aggressive CIP chemicalsPN10Low (diaphragm consumable)~2.5× butterfly
Sanitary Check ValvePrevent backflow on pump discharge, CIP return linesPN10Medium (clack disc wear)~0.8× butterfly
Sanitary 3-Way BallAutomated CIP divert, product / CIP switchingPN16High~3× butterfly

Technical Specifications

Size Range1″ - 4″ (DN25 - DN100); 6″+ on request
End ConnectionTri-Clamp (3A standard), butt-weld optional
Body MaterialSS316L (1.4404) investment casting, internal Ra ≤ 0.8 μm
DiscSS316L mirror polished
Seat / SealEPDM / Silicone / PTFE (21 CFR 177)
ActuationManual lever (8-position lock) / gearbox / pneumatic actuator optional
Pressure RatingPN10 / 10 bar (at 20°C)
Temperature Range-10°C ~ +140°C EPDM; +200°C Silicone / PTFE
Applicable MediaFood, beverage, dairy, brewery, pharma, CIP/SIP fluids
Testingshell & seat pressure test per API 598
Material CertificatesEN 10204 3.1 MTC (material test reports) included
Standard3A, 21 CFR 177, ISO, DIN 11850, EHEDG cleanable

Dimension Table — Sanitary Butterfly Valve (mm)

Size (inch)DNA (face to face)B (body OD)C (shaft)H (overall)
1"2519341272
1.5"3819471276
2"5125641698
2.5"63.5257616105
3"76.1329218122
4"101.63812320145

* Tri-Clamp end dimensions per 3A standard. Butt-weld dimensions and 6″+ sizes available on request.

Worked Example: 2″ CIP Return Valve for a Bangkok Microbrewery

Project: CIP return line from a 50 bbl bright beer tank, 2″ (DN51) sanitary butterfly valve, Tri-Clamp ends, EPDM seat. CIP cycle: 2% NaOH at 85°C, rinse water at ambient, 1% nitric acid at 70°C. Tank operating pressure 2 bar, CIP return line back to sump at 0.5 bar.

Step 1 — Size check: 2″ Tri-Clamp matches existing tank outlet and return header. Flow during CIP return ≈ 12 m³/h. Velocity = 12/3600 / (π/4 × 0.053²) = 1.5 m/s — well within the 1–2.5 m/s hygienic guideline. No pressure drop issue.

Step 2 — Seal material: CIP cycles include NaOH 2% and HNO₃ 1% at 85°C / 70°C. EPDM is the correct choice — it handles hot caustic and nitric acid, and is 21 CFR 177. Silicone would degrade in hot NaOH; PTFE would work but torque is 3× higher and cost is 2×.

Step 3 — Actuation: Manual lever is fine for batch CIP (operator opens/closes per recipe). If the brewery later automates, this body accepts a top-mounted pneumatic rack-and-pinion actuator — we supply the actuator mounting kit as a retrofit.

Step 4 — Documentation: 3-A compliance declaration on request, food-grade seat cert, EN 10204 3.1 MTR for the body. All wetted surfaces Ra 0.8 μm, passivated after electropolishing. Valve ships with plastic end caps to protect Tri-Clamp faces during transit.

4 Common Mistakes When Ordering Sanitary Valves

Mistake 1 — Specifying industrial butterfly valve for hygienic duty: Industrial wafer/double-flanged valves have crevices, painted bodies and Ra > 1.6 μm surfaces that trap product. They fail 3A audit. Always specify sanitary investment-cast body with Tri-Clamp ends and electropolished wetted surface.

Mistake 2 — EPDM for oily / fatty dairy or high-temp SIP: EPDM swells in oils and fats. For milk fat, cream or coconut oil, specify Silicone (and accept its lower abrasion resistance). For SIP at 135°C steam, Silicone is also required — EPDM tops out at ~140°C continuous.

Mistake 3 — Forgetting the 3A end dimension match: 2″ Tri-Clamp in 3A standard (50.5 mm OD flange) is NOT the same as 2″ DIN 11850 (50.0 mm OD) or 2″ ISO. Mixing standards leaks at the clamp. Always specify which standard your existing piping uses — we match it.

Mistake 4 — Accepting non-passivated surface after welding: Field welding a sanitary valve hub without pickling and passivating leaves free iron on the surface. It rusts within weeks in CIP service. We supply pickling paste and passivation gel with the valve, or weld-on hubs pre-passivated.

Commercial Terms & Shipping

Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for orders above USD 20,000. PayPal for sample orders.

Warranty: 12 months after shipment for material and manufacturing defects. Covers casting defects, seat leakage and surface finish non-conformance. Damage from misuse, improper CIP chemicals or abrasive media beyond specified limits is not covered.

Packaging: Export plywood case (fumigation-free). Each valve packed in individual plastic bag with Tri-Clamp end caps to protect polished surfaces during transit.

Shipping Documents: EN 10204 3.1 MTC, 3-A compliance declaration on request, food-grade seat certificate, packing list, commercial invoice. Certificate of origin available on request.

Shipment Port: FOB Ningbo / Shanghai, China. Can also arrange CIF / DAP to your destination port.

Third-Party Inspection: SGS, Bureau Veritas or Intertek pre-shipment inspection supported at your cost.

Need Sizing Help or a Quote?

Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.

Get Free Quote »

FAQ

Sanitary butterfly or sanitary ball valve — which do I specify?

Butterfly for large lines (≥2″), low pressure drop, frequent CIP/SIP, and cost-sensitive bulk flow. Ball for tight shutoff under high pressure, small dosing, and media with solids/slurries. Butterfly is ~50% cheaper and lighter. For most 1″–4″ hygienic utility lines, butterfly is the default.

EPDM, Silicone or PTFE seat — which is right?

EPDM is the industry default for water-based food & beverage, CIP caustic / nitric acid, and SIP steam up to ~140°C. Silicone for ultra-high-temp SIP (up to ~200°C) and oily / fatty media. PTFE for aggressive solvents and extreme chemical resistance — but higher operating torque. All seats meet 21 CFR 177 requirements.

Tri-Clamp or butt-weld end?

Tri-Clamp is the hygienic default — tool-free disassembly for seat replacement, inspection and visual CIP verification. Butt-weld is for permanent welded skids where zero external crevice is required (pharma high-purity, WFI systems). Most breweries / dairies choose Tri-Clamp.

Lever or gearbox actuator?

Lever for 1″–4″ — standard, lightweight, quarter-turn, with 8-position locking. Gearbox for ≥4″ or high-pressure / high-torque service. For automated CIP/SIP, switch to our pneumatic version.

Is this valve truly CIP/SIP cleanable? Any dead leg?

Yes. The body is a single-piece investment casting with no internal crevice; the disc seals against the seat in the closed position; all wetted surfaces are Ra ≤ 0.8 μm electro-polished. For pharma high-purity (WFI / pure steam) we can supply Ra ≤ 0.4 μm and a 3-A / EHEDG declaration of cleanability.

Can I retrofit a pneumatic actuator on a manual lever valve later?

Yes — all our sanitary butterfly valves share a standard top flange (ISO 5211). You can start with a manual lever and add a pneumatic rack-and-pinion actuator in 10 minutes without replacing the valve body. We supply the actuator mounting kit, feedback switch and solenoid as matched spares.

MOQ, stock and lead time?

MOQ is 1 piece. 1″–2″ EPDM Tri-Clamp lever valves are usually in stock (7–15 days). 3″–4″, Silicone / PTFE seats, butt-weld ends, gearbox, or Ra ≤ 0.4 μm electropolished finish takes 15–30 days. We can ship together with matching sanitary ball valve, sanitary check valve, gaskets and clamps in one container.

What is the warranty period for your valves?

We provide a 12-month warranty after shipment for material and manufacturing defects. This covers casting defects, seat leakage and surface finish non-conformance. Damage from misuse, improper CIP chemicals or abrasive media beyond specified limits is not covered.

📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Wafer Check Valve vs Swing Check Valve (2026 Guide)

You May Also Need

Request a Quote for This Sanitary Butterfly Valve

Tell us the size, pressure and quantity you need. We reply within one working day.








    Need a Custom Valve or Fitting?

    Send us your specs: pressure, size, material and quantity — our engineers will reply within 24 hours with a detailed quotation. MOQ 1 piece.

    Southeast Asia: Indonesia, Malaysia, Thailand, Vietnam, Singapore, Philippines · Middle East: Saudi Arabia, UAE, Qatar, Kuwait, Oman, Bahrain · Other: the Americas, Europe, Africa, Australia

    FOB Ningbo / Shanghai · 5–10 days to Southeast Asia · 15–20 days to the Middle East · We reply within 24 hours (usually same business day)

    Commercial terms: T/T 30% deposit + 70% before shipment, L/C at sight · export plywood case / fumigation-free pallet · 12 months warranty after shipment for material and manufacturing defects · EN 10204 3.1 MTC + API 598 test report + packing list + commercial invoice with every order · SGS / Bureau Veritas / Intertek pre-shipment inspection available

    Get Free Quote »
    Disclaimer: This guide is for general engineering reference only. Final valve selection, sizing and installation must follow the manufacturer data sheet, the project P&ID and the applicable code (EN 1092, ASME B16.5, ASME B16.34, EN 10204 3.1). Where this article and those documents differ, the documents govern.