
A pneumatic knife gate valve combines a wafer-style knife gate body with a pneumatic cylinder actuator for automated shutoff in pulp & paper, mining, wastewater treatment, chemical processing and food industry. It responds to 4–20 mA or on/off signals from a PLC or DCS, providing fast, reliable and repeatable operation for slurry, powder and fibrous media.
We manufacture pneumatic knife gate valves in stainless steel CF8 (304) and CF8M (316) as our premium range. Cast iron (GG25), ductile iron (GGG40) and WCB carbon steel bodies are available for budget mining and wastewater projects. Sizes DN50–DN1200 (NPS 2″–48″), wafer ends fitting between DIN EN 1092-1 PN6/PN10 / ANSI Class 150 flanges, sharpened SS304/SS316 gate, EPDM/NBR/Viton/PTFE sleeve. Double acting cylinder standard; single acting spring return (fail-open or fail-close) on request.
Every valve is shell and seat pressure tested per API 598 before shipment, and the cylinder is cycle-tested for leakage and operation. MOQ 1 piece, ISO 9001:2015. For manual operation, compare our manual wafer knife gate valve. For automated clean-media isolation, compare our pneumatic wafer butterfly valve or pneumatic ball valve. The main advantage of a pneumatic knife gate valve over manual operation is fast automated control integrated with your PLC/DCS system. Spring return cylinders offer fail-safe operation — automatically opening or closing when air supply fails, which is critical for safety in mining, wastewater and chemical processing. We directly serve EPC contractors and valve distributors in Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait).
When selecting a pneumatic knife gate valve, specify: size (DN), media type and solids concentration, body material, gate hardness (standard SS316 vs hard-chrome plated for highly abrasive slurry), sleeve material, cylinder type (double acting vs spring return fail-open/fail-close), air supply pressure and accessories (NAMUR solenoid voltage, limit switch box, air filter regulator, handwheel override). These determine cylinder bore sizing and accessories.
Southeast Asia & Middle East Market Notes
Indonesia & Malaysia pulp mills / palm oil: Spring return fail-close with Viton sleeve is standard for automated stock and sterilizer lines — valve closes automatically on air failure to protect the process.
Saudi Arabia & UAE phosphate / mining: Double acting with ductile iron body, SS316 gate, EPDM sleeve, 24V DC solenoid integrated into the plant DCS. Hot desert 55°C ambient — high-temperature Viton cylinder seals specified.
Vietnam & Thailand wastewater: Double acting cast iron body, EPDM sleeve, 220V AC solenoid, PLC-controlled for automated sewage and sludge treatment plants.
Not sure whether you need double acting or spring return for your slurry line?
Get Free Sizing Report →Manual vs Pneumatic vs Electric Knife Gate
| Feature | Manual (Handwheel) | Pneumatic Cylinder | Electric Actuator |
|---|---|---|---|
| Cycle time | 30-120 seconds | 1-5 seconds | 30-90 seconds |
| Remote control | No | Yes (PLC/DCS, 24V signals) | Yes (PLC/DCS) |
| Fail-safe on air/power loss | Stays in position | Spring return: auto opens/closes | Stays (battery backup optional) |
| Explosion proof | N/A | Yes (Ex-proof solenoid) | Expensive (Ex-rated motor) |
| Cost (DN300) | Lowest | ~2-3× manual | ~4-6× manual |
| Best for | Isolation, infrequent operation | Automated slurry lines, fast cycling, hazardous areas | Remote sites without compressed air |
| Our product | Manual Knife Gate | Pneumatic Knife Gate | On request |
Technical Specifications
| Type | Pneumatic cylinder actuated wafer knife gate |
| Size Range | DN50 – DN1200 (NPS 2″ – 48″) |
| End Connection | Wafer type, fits between DIN EN 1092-1 PN6/PN10 / ANSI B16.5 Class 150 / JIS 10K flanges |
| Body Material | CF8M (316) / CF8 (304) — premium; GGG40 / GG25 / WCB on request |
| Gate | SS304 / SS316, sharpened edge (optional hard chrome plating for abrasive service) |
| Sleeve / Seat | EPDM / NBR / Viton (FKM) / PTFE |
| Actuator Type | Pneumatic cylinder, double acting (standard) or single acting spring return (fail-open / fail-close) |
| Air Pressure | 4 – 7 bar (60 – 100 psi) clean dry filtered air |
| Pressure Rating | PN6 – PN10 / ANSI 150# |
| Temperature Range | -10°C ~ +110°C (EPDM) / -20°C ~ +80°C (NBR) / -20°C ~ +180°C (Viton) / -20°C ~ +200°C (PTFE) |
| Options | Solenoid valve (NAMUR 24VDC/220VAC), positioner (4-20mA), limit switch box (IP67), air filter regulator, handwheel override |
| Applicable Media | Slurry, pulp, paper stock, wastewater, ore tailings, powder, syrup |
| Testing | shell & seat pressure test per API 598; cylinder cycle test (1000 cycles) |
| Material Certificates | EN 10204 3.1 MTC (material test reports) included |
| Standard | MSS SP-81, API 600, face-to-face per ISO 5752 |
Dimension Table — DIN EN 1092-1 PN10 Wafer Body (mm)
L = wafer face-to-face length. Flange OD (D), bolt circle (K) and bolt holes (n-ΦL) below match DIN EN 1092-1 PN10 mating flanges. Cylinder overall height, footprint and stroke vary by actuator size and brand — contact us for exact cylinder mounting dimensions.
| DN | NPS | L (mm) | Flange OD D (mm) | Bolt Circle K (mm) | n-ΦL |
|---|---|---|---|---|---|
| 50 | 2″ | 50 | 165 | 125 | 4-Φ18 |
| 65 | 2½” | 50 | 185 | 145 | 4-Φ18 |
| 80 | 3″ | 50 | 200 | 160 | 8-Φ18 |
| 100 | 4″ | 50 | 220 | 180 | 8-Φ18 |
| 125 | 5″ | 50 | 250 | 210 | 8-Φ18 |
| 150 | 6″ | 60 | 285 | 240 | 8-Φ22 |
| 200 | 8″ | 60 | 340 | 295 | 8-Φ22 |
| 250 | 10″ | 70 | 395 | 350 | 12-Φ22 |
| 300 | 12″ | 80 | 445 | 400 | 12-Φ22 |
| 350 | 14″ | 90 | 505 | 460 | 16-Φ22 |
| 400 | 16″ | 100 | 565 | 515 | 16-Φ26 |
| 450 | 18″ | 120 | 615 | 565 | 20-Φ26 |
| 500 | 20″ | 130 | 670 | 620 | 20-Φ26 |
| 600 | 24″ | 130 | 780 | 725 | 20-Φ30 |
| 700 | 28″ | 154 | 895 | 840 | 24-Φ30 |
| 800 | 32″ | 160 | 1015 | 950 | 24-Φ33 |
| 900 | 36″ | 203 | 1115 | 1050 | 28-Φ33 |
| 1000 | 40″ | 216 | 1230 | 1160 | 28-Φ36 |
| 1200 | 48″ | 254 | 1455 | 1380 | 32-Φ36 |
* Standard drilling: DIN EN 1092-1 PN10. ANSI Class 150 / JIS 10K available on request. Cylinder dimensions vary by brand — contact us for exact actuator footprint on your valve size.
Worked Example: Sizing a Pneumatic Cylinder for DN300 Knife Gate
Project: Automated thickened sludge line at a municipal wastewater plant in Hanoi, Vietnam.
Given: DN300 wafer knife gate valve, sludge at 2% solids, 40°C, PN10, air supply 6 bar, require fail-close on air loss.
Step 1 — Determine required cylinder thrust:
Knife gate valve stem thrust for DN300 with EPDM sleeve ≈ 1800 N opening, 1200 N closing. For sludge with 2% solids, apply 1.5× safety factor: required closing force = 1200 × 1.5 = 1800 N.
Step 2 — Select cylinder type:
Requirement: fail-close on air loss → single acting spring return (air opens, spring closes). Cylinder at 6 bar with bore Ø100 mm provides ≈ 2200 N spring closing force > 1800 N . We choose SR100 cylinder.
Step 3 — Select flange standard:
Vietnamese municipal plant specified DIN PN10 flanges. Valve drilling: D=445 mm, K=400 mm, 12×Φ22 bolt holes. Face-to-face L=80 mm per table above.
Step 4 — Select accessories:
Solenoid valve 220V AC (NAMUR, IP65), limit switch box 2× SPDT (visual open/closed indication to PLC), air filter regulator 5 μm with gauge. Handwheel override not required for this automated application.
4 Common Mistakes When Selecting Pneumatic Knife Gate Valves
Mistake 1 — Using double acting where fail-safe is needed: On air supply failure, a double acting cylinder stays in its last position. For emergency shutoff on hazardous slurry, cooling water or chemical lines, specify spring return fail-close. Confirm fail direction with the process engineer.
Mistake 2 — Undersizing the cylinder: Sludge, pulp and ore tailings increase breakaway force vs clean water. Use 1.5× safety factor on closing force for slurry, 2× for sticky media. Undersized cylinders stall after 3-6 months.
Mistake 3 — No air filter regulator (FRL): Compressed air contains moisture, oil and dirt. Without a 5 μm FRL, cylinder seals and solenoid valves fail within 6 months. Always include FRL.
Mistake 4 — Wrong sleeve material for the media: EPDM for water/sewage, NBR for oil, Viton for chemicals/hot, PTFE for strong acid/alkali. Using EPDM for oil or chemical slurry causes sleeve swelling and leakage within weeks.
Need Sizing Help or a Quote?
Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.
Get Free Quote »Applications
Pulp & Paper: Automated stock, slurry, black liquor shutoff.
Mining: Automated ore slurry, tailings, ash, phosphate handling.
Wastewater: PLC-controlled sewage, sludge, digester lines.
Chemical & Food: Automated viscous fluid, powder, syrup and granule transfer.
Commercial Terms & Shipping
Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for orders above USD 20,000. PayPal for sample orders.
Warranty: 12 months after shipment for material and manufacturing defects. Covers casting defects, sleeve leakage, cylinder seal and solenoid defects. Damage from misuse, improper air preparation, corrosive media not matching the selected sleeve is not covered.
Packaging: Export plywood case (fumigation-free) or seaworthy pallet. Cylinders wrapped separately; solenoid valves and limit switch boxes protected.
Shipping Documents: EN 10204 3.1 MTC, pressure test certificate, cylinder cycle test report, packing list, commercial invoice. Certificate of origin and BL available on request.
Shipment Port: FOB Ningbo / Shanghai, China. Can also arrange CIF / DAP to your destination port.
Third-Party Inspection: SGS, Bureau Veritas or Intertek pre-shipment inspection supported at your cost.
FAQ
What is the difference between double acting and spring return pneumatic cylinders?
Double acting uses compressed air for both opening and closing — higher thrust, positive shutoff, but no fail-safe. Spring return uses air to open and a spring to close (or vice versa) — automatically failsafe when air supply is lost, but closing thrust is lower.
Can knife gate valves handle abrasive slurry like mining tailings?
Yes. The sharpened SS304/SS316 gate cuts through fibrous and abrasive media, and the full-round EPDM or PTFE sleeve provides complete shutoff. For highly abrasive mining service, specify hard-chrome plated gate and Viton sleeve.
What air pressure is required?
Standard 4–7 bar (60–100 psi) clean, dry, filtered compressed air. Always include an air filter regulator (FRL). Lower pressure can be accommodated with larger cylinder sizes.
Can you mount solenoid valve and limit switch before shipment?
Yes. We pre-assemble NAMUR solenoid valves (24VDC or 220VAC), limit switch boxes, air filter regulators and positioners on the cylinder, so the valve arrives ready for direct field installation.
What is the maximum size you can supply?
Standard range goes up to DN1200 (48″). Larger sizes (DN1400–DN2000) are available on request with extended lead time of 25–35 days.
Can the valve be operated manually if compressed air fails?
Yes. We recommend adding a handwheel override (manual gearbox) for DN200 and above. For spring return versions, the spring automatically moves the valve to its fail position on air loss.
What is the lead time and MOQ?
MOQ is 1 piece. Standard sizes (DN50–DN300) ship in 15–20 days. Larger sizes, 316L body, PTFE sleeve or ATEX versions take 25–35 days.
What is the warranty period for your valves?
We provide a 12-month warranty after shipment for material and manufacturing defects. This covers casting defects, sleeve leakage and cylinder/solenoid manufacturing defects. Damage from misuse, improper air preparation or corrosive wear beyond specified limits is not covered.
📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• Wafer Check Valve vs Swing Check Valve (2026 Guide)
• How to Select a Wafer Butterfly Valve for Seawater Service
You May Also Need
Related Technical Guides
Knife Gate Valves for Slurry & Sludge · Pneumatic Actuator Selection
Request a Quote for This Pneumatic Knife Gate Valve
Tell us the size, pressure and quantity you need. We reply within one working day.

