
A flanged butterfly valve has two flanged ends that bolt directly to matching pipeline flanges, providing a stronger and more reliable connection than wafer-style valves. It is widely used in water treatment plants, HVAC systems, industrial piping and fire protection where positive isolation and leak-free performance are critical.
We manufacture flanged butterfly valves in stainless steel CF8 (304) and CF8M (316) as our standard range. Ductile iron (GGG50), cast iron (GG25) and carbon steel (WCB) bodies are available for budget HVAC and water treatment projects. Sizes DN50–DN350 (NPS 2″–14″), flanged ends per DIN EN 1092-1 PN16 (also ANSI B16.5 Class 150# / JIS 10K on request), PN10–PN16, disc in SS304/SS316 with EPDM/NBR/Viton seat. Lever operator for DN50–DN200; gear operator for DN250 and above.
Every valve is shell and seat pressure tested per API 609 before shipment. MOQ 1 piece, 7–15 days delivery, ISO 9001:2015. For automated operation, compare our pneumatic wafer butterfly valve. For food-grade service, see our sanitary butterfly valve. For sizing guidance, read our butterfly valve selection guide. get a detailed quotation for your project.
The main advantage of a flanged butterfly valve over a wafer butterfly valve is the positive flanged connection. The two flanged ends bolt directly to pipeline flanges, eliminating the risk of body blowout under pressure and allowing independent line isolation. In pumping stations, pair it with a swing check valve to prevent backflow, and protect the valve body with a Y-strainer. Complete the system with matching stainless steel flanges. We directly serve EPC contractors and valve distributors in Southeast Asia (Indonesia, Malaysia, Thailand, Vietnam) and the Middle East (Saudi Arabia, UAE, Qatar, Kuwait).
Southeast Asia & Middle East Market Notes
Indonesia & Malaysia palm oil mills: Corrosive condensate and sterilizer steam — recommend CF8M (316) body with Viton seat, flanged ends for positive isolation on large-diameter lines.
Saudi Arabia & UAE desalination plants: Seawater chloride environment — 316L body + SS316 disc + EPDM seat. ANSI 150# flanges commonly specified for RO pre-treatment and brine discharge.
Vietnam & Thailand HVAC: CF8 (304) body with EPDM seat, PN16 flanged ends, lever operated — the most cost-effective choice for chilled water and condenser water in commercial buildings.
Not sure which flange standard or size you need?
Get Free Sizing Report →Technical Specifications
| Size Range | DN50 – DN350 (NPS 2″ – 14″) |
| End Connection | Flanged ends per DIN EN 1092-1 PN16 (standard); ANSI B16.5 Class 150# / JIS 10K on request |
| Body Material | CF8M (316) / CF8 (304) — standard; GGG50 / GG25 / WCB available on request |
| Disc | SS304 / SS316 (optional Nylon or EPDM coated) |
| Stem | SS416 / SS304 |
| Seat | EPDM / NBR / Viton (FKM) |
| Pressure Rating | PN10 – PN16 / ANSI 150# |
| Temperature Range | -10°C ~ +110°C (EPDM) / -20°C ~ +80°C (NBR) / -20°C ~ +180°C (Viton) |
| Actuation | Lever (DN50–DN200) / Gear (DN250–DN350) |
| Applicable Media | Water, oil, gas, HVAC, water treatment, fire protection, mild chemicals |
| Testing | shell & seat pressure test per API 609 |
| Material Certificates | EN 10204 3.1 MTC (material test reports) on request |
| Standard | API 609, EN 593, face-to-face per EN 558 Series 14; flange drilling per DIN EN 1092-1 PN16 |
Flanged vs Wafer vs Lugged Butterfly Valve
| Feature | Flanged | Wafer | Lugged |
|---|---|---|---|
| Connection | Own flanges, bolts directly to mating flanges | Fits between two flanges, through-bolted | Threaded lugs, can isolate one side |
| Face-to-face | Longest (EN 558 Series 14) | Shortest (Series 20) | Same as wafer |
| Weight | Heaviest | Lightest | Medium |
| Line isolation | Independent | Must shut down both sides | Can isolate one side |
| Cost (DN150) | Highest | Lowest | ~15% above wafer |
| Best for | Critical process, high pressure, fire protection | HVAC, water treatment, large diameter | Pump stations, risers |
| Our product | Flanged Butterfly Valve | Wafer Butterfly Valve | On request |
Dimension Table — DIN EN 1092-1 PN16 Flanged (mm)
Flange OD (D), bolt circle (K) and bolt holes (n-ΦL) below are drilled to DIN EN 1092-1 PN16. A/B/C/D1 are valve body dimensions. ANSI B16.5 Class 150# / JIS 10K drilling available on request — specify when ordering.
| DN | NPS | A (mm) | B (mm) | C (mm) | D1 (mm) | Flange OD D (mm) | Bolt Circle K (mm) | n-ΦL (Bolt Holes) |
|---|---|---|---|---|---|---|---|---|
| 50 | 2″ | 83 | 120 | 108 | 52.9 | 165 | 125 | 4-Φ18 |
| 65 | 2½” | 93 | 130 | 112 | 64.5 | 185 | 145 | 4-Φ18 |
| 80 | 3″ | 100 | 145 | 114 | 78.8 | 200 | 160 | 8-Φ18 |
| 100 | 4″ | 114 | 155 | 127 | 104.0 | 220 | 180 | 8-Φ18 |
| 125 | 5″ | 125 | 170 | 140 | 123.3 | 250 | 210 | 8-Φ18 |
| 150 | 6″ | 143 | 190 | 140 | 155.6 | 285 | 240 | 8-Φ22 |
| 200 | 8″ | 170 | 205 | 152 | 202.5 | 340 | 295 | 12-Φ22 |
| 250 | 10″ | 198 | 235 | 165 | 250.5 | 400 | 355 | 12-Φ26 |
| 300 | 12″ | 220 | 280 | 178 | 301.5 | 455 | 410 | 16-Φ26 |
| 350 | 14″ | 245 | 330 | 190 | 333.3 | 520 | 470 | 16-Φ26 |
* Standard drilling: DIN EN 1092-1 PN16. ANSI B16.5 Class 150# (150#) and JIS 10K drilling available on request — flange OD and bolt circle will differ; contact us for exact ANSI/JIS dimensions.
Worked Example: Selecting a DN150 Flanged Butterfly Valve
Project: Cooling water return line for a pharmaceutical plant in Jeddah, Saudi Arabia.
Given: DN150 flanged butterfly valve, water at 40°C, PN16, ANSI 150# flanges required, media is cooling water with mild chemicals.
Step 1 — Determine size:
Flow rate Q = 200 m³/h, pipe DN150. Pipe area A = π × (0.15/2)² = 0.0177 m².
Velocity v = 200 / (3600 × 0.0177) = 3.14 m/s — acceptable for cooling water (recommended 1.5-3.5 m/s).
Step 2 — Select material:
Jeddah coastal environment has high humidity and salt air. CF8M (316) body with SS316 disc is recommended. EPDM seat for 40°C cooling water.
Step 3 — Select flange standard:
End user specified ANSI 150# flanges. We supply valve with ANSI B16.5 Class 150# drilled flanges (NPS 6″, flange OD 279 mm, bolt circle 241 mm, 8 × 3/4″ bolt holes) to match existing piping. Note: this differs from the standard DIN PN16 drilling (OD 285mm, K=240mm, 8×Φ22).
Step 4 — Select actuation:
Valve is used for isolation during maintenance, not daily throttling. Lever operator is sufficient. Gear operator optional if the valve is located in a hard-to-reach location.
4 Common Mistakes When Selecting Flanged Butterfly Valves
Mistake 1 — Mismatched flange standard: A PN16 valve will not bolt to an ANSI 150# flange (bolt circle and OD differ). Always confirm flange standard before ordering — DIN EN 1092-1 (Europe/Asia), ANSI B16.5 Class 150# (America), JIS 10K (Japan), or AS/NZS (Australia).
Mistake 2 — Using EPDM seat for hot water above 95°C: EPDM max is +110°C. For hot water at 95–110°C, use Viton or PTFE-lined disc. For steam, use a flanged globe valve instead.
Mistake 3 — Specifying cast iron body for seawater: Cast iron corrodes in chloride environments. Always use CF8M (316) for desalination, coastal and marine applications.
Mistake 4 — Forgetting gasket and bolts: Flanged valves require new gaskets and bolts during installation. We supply matching stainless steel flanges, gaskets and bolts on request — specify material grade (304 or 316L).
Need Sizing Help or a Quote?
Send size (DN), pressure (PN/ANSI), material (304/316L), seat (EPDM/Viton) and quantity — we reply within 24 hours.
Get Free Quote »Applications
Water Treatment: Treatment plants, pump stations, distribution networks, RO desalination.
HVAC Systems: Chilled water, hot water and condenser water circuits in commercial buildings.
Industrial Piping: Chemical processing, power plants, mining, pulp & paper.
Fire Protection: Fire pump headers and sprinkler system main line control.
Quality Control
1. Raw material inspection (spectrometer test for chemical composition)
2. CNC machining & dimensional inspection
3. Shell pressure test (1.5× PN rating, 60 seconds hold)
4. Seat pressure test (1.1× PN rating, bubble-tight acceptance per API 598)
5. Final visual inspection, torque test & packing
Commercial Terms & Shipping
Payment: T/T 30% deposit + 70% before shipment; L/C at sight accepted for orders above USD 20,000. PayPal for sample orders.
Warranty: 12 months after shipment for material and manufacturing defects. Covers casting defects, seal leakage and material non-conformance. Damage from misuse, improper installation or corrosion beyond specified limits is not covered.
Packaging: Export plywood case (fumigation-free) or seaworthy pallet. Suitable for FCL container and LCL consolidation.
Shipping Documents: EN 10204 3.1 MTC, pressure test certificate, packing list, commercial invoice. Certificate of origin and BL available on request.
Shipment Port: FOB Ningbo / Shanghai, China. Can also arrange CIF / DAP to your destination port.
Third-Party Inspection: SGS, Bureau Veritas or Intertek pre-shipment inspection supported at your cost.
FAQ
What is the difference between flanged and wafer butterfly valves?
Flanged valves have their own flanges and bolt directly to pipeline flanges — positive isolation, easier to remove, but heavier and more expensive. Wafer valves fit between two flanges — thinner, lighter, cheaper, but both sides must be shut down for maintenance.
Which flange standards do you supply?
Standard drilling is DIN EN 1092-1 PN16. We can also drill ANSI B16.5 Class 150# (American), JIS 10K (Japanese) and AS/NZS (Australian) on request. Specify your required standard when requesting a quote — the bolt circle and flange OD must match your existing piping.
Can you supply 316 stainless steel flanged butterfly valves for seawater?
Yes, CF8M (316) body with SS316 disc and EPDM or Viton seat is recommended for seawater and desalination. We also supply matching lift check valves and stainless steel flanges.
What is the lead time?
Standard sizes in stock ship within 7 days. Custom flange drilling, special materials or large sizes take 15–30 days. Rush orders can be arranged for urgent EPC projects.
Do you provide material certificates?
Yes, EN 10204 3.1 MTC (material test reports), pressure test certificates and third-party inspection (SGS / Bureau Veritas / Intertek) are available upon request for every order.
What is your MOQ?
MOQ 1 piece. We support sample orders for new customers to test quality before bulk orders.
Can you supply automated (pneumatic or electric) flanged butterfly valves?
Yes. We offer pneumatic actuated and electric actuated versions for automated systems. Actuator brands available: Air Torque, KITZ, or OEM.
What is the warranty period for your valves?
We provide a 12-month warranty after shipment for material and manufacturing defects. This covers casting defects, seal leakage and material non-conformance. Damage from misuse, improper installation or corrosion beyond specified limits is not covered.
📚 Further reading:
• Butterfly Valve Selection Guide (Size, Pressure, Material)
• How to Select a Wafer Butterfly Valve for Seawater Service
• Wafer Check Valve vs Swing Check Valve (2026 Guide)
You May Also Need
Related Technical Guides
Wafer vs Flanged Butterfly Valve · Butterfly Valve Selection Guide · Butterfly vs Ball Valve
Request a Quote for This Flanged Butterfly Valve
Tell us the size, pressure and quantity you need. We reply within one working day.

